Available for in store pickup!
Select "In Store Pickup" at check out. Eligible for in stock items only.
More info...
Product Description
- 2002-2005 WRX
- 2006-2007 WRX
- Fitment Notes: To determine which size bleeders your calipers have, use a wrench to measure the hex size of your existing bleeder screws. If a 10mm wrench fits you will need 10mm Speed Bleeders. If a 8mm wrench fits then you will need 7mm Speed Bleeders.
- Brand: Speed Bleeder
- Manufacturer's Part Number: -
- Size: M7 x 1.0mm
- Pack Quantity: 4
- Condition: New Product
- Kit Contents:
(4) bleeder screws
(4) rubber dust caps
FITMENTS:
Subaru
| Manufacturer's Description: Introducing SPEED BLEEDER brand check valve, the Speed Bleeder screw with the built-in check valve. It is truly a one-person device. Once installed, it becomes a permanent part of the brake system. When it is time to bleed your brakes, you loosen the Speed Bleeder screw a 1/4 turn and pump your brake pedal. When the pedal is depressed the pressure generated opens the check valve letting air and brake fluid out of the end of the Speed Bleeder screw. When you release the pedal and it returns to the up position, the check valve closes and prevents any air from reentering the system through the Speed Bleeder screw. When bubble free fluid is evident you close the Speed Bleeder screw. In the closed position it works just like your stock bleeder screw and prevents any brake fluid from leaking out. It generally takes about 5 pumps to purge each caliper or wheel cylinder. That is all there is to bleeding your brakes. If at a later date you need to bleed your brakes, the patented thread sealing system makes it easy to open the Speed Bleeder screw to perform the bleeding operation. It is made of quality materials and it is economical. Included: • Speed Bleeder Brake Bleeder Screws (Set/4), 2002-2007 WRX Features: • Stainless steel spring • Stainless steel ball • Brass retainer • The threads are roll formed. This process results in a stronger and smoother thread than one that is cut. • The chamber for the ball and spring is precision reamed and the seat for the stainless steel ball is machined to exacting tolerances. • Zinc chromate plating withstands a 30 hour salt spray. Other plating with higher salt spray results is also available. • Patented thread sealing system seals the threads when the bleeding operation is performed, preventing air from being sucked back into the system. • The pre-applied thread sealant also displaces air and moisture during thread engagement preventing rust...which usually results in rounded off corners on the hex or busted off bleeder screws making it necessary to replace the caliper or brake cylinder. The application of thread sealant thus makes it easy to loosen or remove the bleeder screw at any time. |
Inventory Updated Daily