Product Description
- 2004-2007 STi
- 2008-2014 STi
- 2015-2021 STi
- Fitment Notes: Manual Transmission Only
- Brand: Go Fast Bits (GFB)
- Manufacturer's Part Number: 4002
- Primary Material: 6061-T6 Aluminum
- Installation Guide (
PDF) - Manufacturer's Warranty: Limited Lifetime
- UPC: 9328022004020
- GTIN: 09328022004020
- Condition: New Product
FITMENTS:
Subaru
| Manufacturer's Description: General information GFB's Short Shift kit (part number 4002) is like no other until you feel the action of one for yourself, you won t believe the difference! Why did we bother to make a short shift kit, when there are so many other brands available? Because there was room for improvement! Our unique system means that not only is the shift throw distance fully adjustable, it can be reduced more than any other brand by a long shot (at the shortest setting, the throw from 3rd to 4th is a mere 50mm, or 1.95 ), whilst retaining the stock gearstick height. We've also made the installation easier than other brands by including a unique pin removal tool for the pesky little split pin holding the reverse lock-out cable - once you install it, you'll know why little details like this make such a big difference! Our products are manufactured in Australia and the company is accredited to ISO 9001, which ensures our products meet stringent quality requirements at all stages of manufacture. GFB have Australia's best performance turbo management solutions. See more of our range at www.gfb.com.au. More about Short Shift Kits If you want a race-car feel when you change gears, look no further than a GFB short shift kit, the shortest throw shifter on the market! STi 6-Speed Short Shift Kit 4002-1Following on from our popular WRX short-shift kit, we have now released a new version to suit Subaru's 6-speed gearbox found in all late-model STi's, from MY02 and on. As with our WRX kit, the GFB STi short shift kit includes a unique clamp arrangement that allows the shift throw to be reduced much more than by changing the gearstick alone. As you can see from the picture, the GFB clamp eliminates the need to lift the gearbox linkage higher to reduce shift throw. Instead, you simply select one of the three holes. 4002-2The factory shifter in an STi has a shift throw of 40mm per gate; the GFB unit is adjustable from the factory setting, right down to a tiny 22mm per gate! To put this into perspective, the best any aftermarket shifter (that replaces only the gearstick) can hope to achieve is 30mm per gate, without modifications to the linkages or surrounding bodywork. The photos opposite show the stock STi shifter vs the GFB shifter from 3rd to 4th gear. Installation is done completely from within the car, and is made much easier with the inclusion of a special tool for removal and installation of the reverse lock-out cable pin. Typically the installation can be completed within 20 minutes. |
Inventory Updated Daily
