Product Description
- 2002-2005 WRX
- Brand: GSC Power-Division
- Manufacturer's Part Number: 7020S3
- Disclaimer: This product is intended for OFF ROAD use only and may not be legal for street use.
- Off Road Use Only?: This product is intended for OFF ROAD use only and may not be legal for street use.
- Condition: New Product
FITMENTS:
Subaru
| Manufacturer's Description: GSC Power-Division billet S3 camshafts for the EJ205 WRX Version 5 and 6. These cams are built to suit the high horsepower Subys. With a power range of 700 WHP and up, you need some certain mods to utilize the true potential of the S3s: built motor, with a built/ported head, and a good engine management system. Upgraded valve springs are required; beehive valve springs are recommended, but not required. • Check Pictures for cam placement. Long nose = Left Side, short nose = Right Side • Due to the lobe size, head castings will need to be filed down slightly for clearance - Please check during install • Proper break in and running high zinc oil is a must on flat tappet engines • Must be installed by an experienced technician |
Inventory Updated Daily
